An industrial computer equipped with the necessary hardware and software, designed to take over and perform control functions – process control, control of equipment on railways and rolling stock.
ACOS200/Z1
Processor, FLASH / EEPROM | STM32F427, 2 MB + 4 MB / 32 KB |
Backed-up RAM memory | 1 MB |
Slot for Micro SD card | Accessible after cover removal |
RTC, accuracy (25 ° C) | CPU, ±20 ppm (max. ±1,73 s/day) |
RAM + RTC backup | CR2477 lithium battery removable module |
Battery lifetime | 5 years in normal environment |
Inputs | 32× DI + 16× AI |
Digital inputs | 24 V DC |
Galvanic isolation of digital inputs | Yes 1) |
Analogue inputs | (0 to 10) V DC / (0 to 20) mA DC / Ni1000 / Pt1000 |
Outputs | 32× DO + 8× AO |
Digital outputs (transistor) | 24 V/0.3 A DC |
Galvanic isolation of digital outputs | Yes 1) |
Analogue outputs | (0 to 10) V DC, maximum load 10 mA |
Communication |
|
RS232 | 1 × connector D-Sub DE-9 |
Galvanic isolation | Yes 1) |
RS485 | 1×, connector WAGO 231 |
Galvanic isolation | Yes 1) |
Ethernet | IEEE802.3 (connector M12) |
CAN | 2×, connector WAGO 231 |
Galvanic isolation | Yes |
Power supply | 14.4 V to 33.6 V DC 2) |
Power consumption | Max. 220 mA at 24 V DC |
Reverse polarity / overvoltage protection | Electronic |
Miscellaneous |
|
Signal connection | WAGO 231 cage clamps |
Ingress protection rate | IP20, placed in metal housing |
Operation temperature range | -40 °C to 70 °C |
Maximum ambient humidity | < 95 % non-condensing |
Weight | 2,04 kg |
Dimensions (w × h × d) | (395 × 187 × 44) mm |
Programming | DetStudio / EsiDet |
AMiNi5D/Z1
CPU | STM32F437 |
FLASH memory | 2 MB + 16 MB |
RAM memory | 1 MB + 16 MB |
SRAM + RTC backup | 10 years |
Slot for memory card | Micro SD |
Display | TFT IPS (320 × 240) pixels |
Keyboard | 8 buttons |
Digital inputs | 8× DI with GI |
Type of input | 24 V DC / AC |
Analogue inputs | 8 AI without GI |
Type of input | 0 V to 10 V / 0 mA to 20 mA / |
Digital outputs | 8× DO with GI |
Output type | 24 V / 0.3 A DC |
Analogue outputs | 4× AO without GI |
Output type | 0 V to 10 V (max 10 mA) |
Communication |
|
RS232 | 1 × without GI, connector RJ45 |
RS485 | 1 × with GI, connector WAGO231 |
Ethernet | 10/100 Mbps, connector RJ45 |
Power supply | 19.2 V DC to 28.8 V DC |
Power consumption (w/o output load) | 120 mA |
Miscellaneous |
|
Signal connection | WAGO 231 clamp connectors |
Ingress protection rate | IP20 |
Operating temperature | -20°C to +70°C |
Maximum ambient humidity | < 95%, non-condensing |
Mounting | DIN rail 35 mm |
Weight | 0.36 kg |
Dimensions | (160 × 91 × 62) mm |
Standards | EN 50155, EN 50121-3-2, EN 61373, EN 45545-2 HL2 |